The C8702 is the controller card which is always necessary to operate the C8000 frames.

Each frame needs a C8702 as they are working independently from each other.

The C8702 can come with an SNMP option to be integrated in an SNMP monitoring chain.

The communication with the C8000 modules is done via the CAN bus, i.e. the Frame Controller “talks” to the C8000 modules via CAN bus while external applications communicate via TCP/IP over Ethernet with the C8702.

The CAN bus is a simple two-wire differential serial bus, it operates in noisy electrical environments with a high level of data integrity. Its open architecture and user-definable transmission medium make it extremely flexible. Capable of high-speed (1 Mbits/s) data transmission over short distances (40 m) and low-speed (5 Kbits/s) transmissions at lengths of up to 10,000 m, the multi-master CAN bus is highly fault tolerant, with powerful error detection and handling designed in.

About C8000 series
The C8000 is an ensemble of Frames, I/O interfaces and DSPs designed to tailor the different processing requirements of broadcasters according to their exact needs. Pick up the type and amount of input and output interfaces to get your signals into the C8000 frames, select the DSP you need (Loudness control, Shuffling, Delay, various Dynamics processings, etc.) and solve your problems easily and adequately. Operation of C8000 series is performed via Web Interface, but also remote controls (hardware and software) offered by Junger Audio or third parties (VSM).