General
power consumption: approx. 20 W
dimensions: 19 inch, 1 RU, 250 mm depth
weight: appr. 4.5 kg
Processing
sample rate: 48 kHz
audio data format: 24 bit (AES/EBU,HD-SDI), 20 bit (SD-SDI)
Digital I/O
AES/EBU
level: 5 Vpp / 110 Ohm, balanced
connector: XLR
level: 1 Vpp / 75 Ohm, unbalanced
connector: BNC
input format: AES professional, AES consumer
output format: same as input
SDI
SD-SDI
VIDEO:
standard: SMPTE 272 M–A, 270 Mbit SD-SDI
connection: BNC, 75 Ohm, coaxial
signal level: 800mV ±10%
equalisation: 300m (Belden 8281 , 270 MHz)
return loss: >15 dB
supported video standards:
SD 525/59.94 SMPTE 125M
SD 625/50 SMPTE 125M
AUDIO:
audio data format : 20 Bit, transparent for C-Bit and U-Bit according to AES3
audio sample rate : 48 kHz synchronous to video-carrier
latency : (deembedder + embedder)
SD : < 2,6 msec
HD-SDI
VIDEO:
standard: SMPTE 299M 1,485 Gbit HD-SDI
SMPTE 272M–A, C 270 Mbit SD-SDI
connection: BNC, 75 Ohm, coaxial
signal level: 800mV ±10%
equalisation: 130m (Belden 1694A, 1.485GHz)
300m (Belden 8281 , 270 MHz)
return loss: >15 dB (1.485 GHz)
supported video standards:
HD 720/60 SMPTE 296M HD 1080/25 SMPTE 274M
HD 720/50 SMPTE 296M HD 1080/24 SMPTE 274M
HD 720/30 SMPTE 296M HD 1080/50 SMPTE 295M
HD 720/25 SMPTE 296M HD 1035/60 SMPTE 260M
HD 720/24 SMPTE 296M
HD 1080/60 SMPTE 274M SD 525/59.94 SMPTE 125M
HD 1080/50 SMPTE 274M SD 625/50 SMPTE 125M
HD 1080/30 SMPTE 274M
all HD-standards are supported also with their 1/1001-frame-rates
AUDIO:
audio data format : 24 Bit, transparent for C-Bit and U-Bit according to AES3
audio sample rate : 48 kHz synchronous to video-carrier (SD and HD)
32 kHz ... 48 kHz asynchronous to video-carrier (HD only)
latency : (deembedder + embedder)
HD : < 800µsec
SD : < 2,6 msec
Sync
SYNC IN AES/EBU connector : BNC, 75 Ohm, coaxial level : 0,5 ... 5 Vpp input format : AES professional, AES consumer VIDEO connector : BNC, 75 Ohm, coaxial level : 0,5...1 Vpp input format : Blackburst or PAL/NTSC composite video Remote serial remote interface RS-422 in/out level: TTL connector: 9 pin SUB-D male/female
GPI parallel remote
level: +3…+30V, H-active, optocoupler
connector: 15 pin SUB-D female
Tally Out level: normally closed relais contacts
Contact rating: 1A 24 VDC, 0,5 A 125 VAC
max. 30 W 62,5 VA
max. 60 VDC, 125 VAC
connector: 15 pin SUB-D male
