Descargas

Search

Firmware

  • D*AP8 FLX / TAP EDITION / CODEC EDITION rel_dap8_mei_5_1_2.zip descargar (ZIP, 40 MB)
    Changelog 5.1.2 (2017-03-17):

    Firmware for D*AP8 FLX, TAP EDITION and CODEC EDITION

    Changes 5.1.2:

    • fixed (Backup/Restore) coprocessor, watermarking and measurement were missing in preset restore filter list

    Changes 5.1.1:

    • new feature (Web UI) added mouse over tool tip to FM Conditioner peak deviation target
    • new feature (Web UI) maximum true peak output measurement with included pre-emphasis for FM Conditioner
    • new feature (FM Conditioner) added presets for operation and calibration (see manual)
    • improved (Backup/Restore) system message for partially restored backup files
    • fixed (FM Conditioner) problem with FM Conditioner modulation peak handling
    • fixed (Web UI) creating events works as expected now
    • fixed (Events) event active status when copying events from existing events
    • fixed (SDI) local routing mute (no routing crosspoint set) is now working as expected
  • D*AP8 MAP EDITION rel_map_2_8_1.zip descargar (ZIP, 40 MB)
    Changelog 2.8.1 (2016-08-17):

    Firmware for D*AP8 MAP EDITION Monitoring Audio Processor

    Changes 2.8.1:

    • new feature (Dolby) Dolby firmware version 2.1.0.4 for CAT1100 officially supported and included in system firmware file

    Changes 2.8.0:

    • new feature (Mobile UI) configurable button matrix (please see Mobile UI side menu)
    • new feature (Mobile UI) functions can now be locked or hidden from Mobile UI via Remote Access control page
    • new feature (Web UI) important status messages are now shown on a red info bar
    • new feature (Web UI) preset cleanup function helps deleting unused presets
    • new feature (XAP) remote access via XAP RM1 is now prepared to be restricted to certain function sets
    • new feature (Dolby) Dolby firmware version 2.1.0.2 for CAT1100 officially supported
    • new feature (Measurement) added downmix output to metering sources
    • improved (XAP) disconnecting XAP from M*AP now requires prompt confirmation
    • improved (XAP) mute is now shown more clearly in the XAP display
    • improved (X*AP) removed knob acceleration from main volume
    • improved (Web UI) Firefox on Windows 10 is now supported
    • improved (Web UI) option board detection error message clarified
    • improved (Mobile UI) level meter readability
    • improved (Mobile UI) metering precision
    • improved (Dolby) Metadata default settings
    • improved (Dolby) output mute on non-audio flag now consistent
    • improved (Presets) added new default presets
    • improved (Measurement) 7.1 backsurround channels loudness weighting now according to ITU 1770-4
    • improved (Audio) manual stereo routing is now carried out simultaneously for both channels
    • improved (System) status and front panel display turns red on DSP halt
    • improved (Sync) AES audio input channel 1/2 is now added as a default to the sync priority list
    • improved (Firmware) firmware files are internally checked for compatibility before update
    • improved (Backup) added serial number to exported backup file name
    • improved (Licensing) Dolby E encoder license is now shown more clearly in license list
    • fixed (Backup) unnecessary reboot after restoring backup file
    • fixed (Web UI) Microsoft Edge is not supported yet and now showing an unsupported browser message
    • fixed (Dante and MADI) rarely occurring problem with detection of option boards DT-100 and MX-164 on startup
    • fixed (MADI) unwanted cpu load with unconnected MADI inputs
    • fixed (Web UI) problem when modifying Log Port and Matrix routings in preset section
    • fixed (Web UI) enabling bass management now highlights LFE Gain in circuit diagram
    • fixed (Web UI) problem with sticky tool tips
    • fixed (Web UI) checkbox width in I/O Events
    • fixed (Web UI) problem with occasional appearing script problem in some browsers
    • fixed (Web UI) rarely occurring Web UI inaccessibility due to system overload
    • fixed (Web UI) problem when importing single presets in Chrome and Firefox Browsers
    • fixed (Web UI) Local SDI and MADI Routing now works properly
    • fixed (Web UI) problem when modifying routings in preset section
    • fixed (Mobile UI) deleting Hotkeys no longer stops Mobile UI from loading
    • fixed (Measurement) all meters now have the same release timing
    • fixed (Measurement) unintended opening of speech gate in Dialnorm measurement without input signal present
    • fixed (Dolby) removed unnecessary error message from systems without Dolby E encoder
    • fixed (Dolby) wrong latency in Decoder/Emulation mode after initial boot
    • fixed (Presets) problem when deleting presets while being loaded
    • fixed (Presets) empty preset groups are no longer automatically restored to factory settings on reboot
  • D*AP4 FLX / LM EDITION rel_dap4_mei_4_1_1.zip descargar (ZIP, 30 MB)
    Changelog 4.1.1 (2017-02-10):

    Firmware for D*AP4 FLX and LM Edition

    Changes 4.1.1:

    • new feature (Web UI) added mouse over tool tip to FM Conditioner peak deviation target
    • improved (Backup/Restore) system message for partially restored backup files
    • fixed ((Web UI) problem with interrupted metering
    • fixed (Events) event active status when copying events from existing events

    Changes 4.1.0:

    • new feature (Web UI) True Peak Limiter bar graph on FM Conditioner page for improved overview
    • new feature (Web UI) maximum true peak output measurement with included pre-emphasis for FM Conditioner
    • new feature (Dante) Dante firmware version updated - device is now prepared for AES67 mode operation
    • new feature (XAP) automatically reconnects after network drop out or power down (XAP firmware update required!)
    • new feature (XAP) automatic IP-conflict detection and warning (XAP firmware update required!)
    • new feature (Web UI) Dante locked status and AES67 mode shown on Dante interface status page
    • new feature (Audio) Spectral Signature can now be set to manual freeze to stop it from reacting on unwanted audio signals or make use of it as a static equalizer
    • fixed (FM Conditioner) problem with fm modulation peak handling
    • fixed (SDI) local routing mute (no routing crosspoint set) is now working as expected
    • fixed (Web UI) issue when setting routing crosspoints in Google Chrome
    • fixed (Web UI) time and date are no longer restored from backup file
    • improved (Web UI) FM Conditioner color scheme
    • improved (Web UI) preset import is now handled at once for multiple presets from a single backup file
    • improved (XAP) all current AP series parameters are now supported on the XAP
    • improved (Web UI) routing matrix scaling permanently enabled
    • improved (Web UI) X*AP enable checkboxes greyed out for Remote Hotkeys greater than eight
  • D*AP4 VAP EDITION rel_vap_1_4_2.zip descargar (ZIP, 30 MB)
    Changelog 1.4.2 (2016-12-16):

    Firmware for D*AP4 VAP EDITION Voice Audio Processor

    Changes 1.4.2:

    • new feature (Dante) Dante firmware version updated - device is now prepared for AES67 mode operation
    • new feature (XAP) automatically reconnects after network drop out or power down (XAP firmware update required!)
    • new feature (XAP) automatic IP-conflict detection and warning (XAP firmware update required!)
    • new feature (Web UI) Dante locked status and AES67 mode shown on Dante interface status page
    • improved (Audio) updated presets and default settings
    • improved (XAP) all current AP series parameters are now supported on the XAP
    • improved (Web UI) preset import is now handled at once for multiple presets from a single backup file
    • improved (Web UI) create preset event from program only
    • improved (Web UI) moved M/S matrix within preset events from Voice to its own group
    • improved (Web UI) default stereo linking is now set to linked (after initialization to factory defaults)
    • improved (Web UI) X*AP enable checkboxes greyed out for Remote Hotkeys greater than eight
    • fixed (Audio) problem with Leveler action in linked stereo mode
    • fixed (Web UI) graphical problem with voice over preset section

    Changes 1.4.1 r2:

    • added factory default presets file to firmware package please see enclosed ‘how to’ guide for restore instructions

    Changes 1.4.1:

    • new feature (Audio) Leveler in voice channels can now be set to manual freeze to stop it from reacting on unwanted audio signals (coughs, intercom talk…)
    • new feature (Audio) Leveler in voice channels is now improved with an easier to set up Freeze Threshold and Low Level Behaviour parameters, known from Level Magic
    • new feature (Audio) Spectral Signature can now be set to manual freeze to stop it from reacting on unwanted audio signals or make use of it as a static equalizer
    • new feature (Audio) Level Magic (optional license) is now equipped with a response boost function that temporarily increases its reaction to incoming high level signals - please refer to the manual for details (Release)
    • new feature (Audio) Level Magics initial response to already normalized audio material was significantly improved
    • new feature (Audio) Level Magic is now equipped with an automatic Clear Processing History function that resets the system on long periods of disrupted audio. Please note, Below Threshold Mode needs to be set to Release
    • new feature (System) the real time clock can now be synchronized to NTP time servers
    • new feature (System) system status is now available as a parameter trigger
    • new feature (Interface) next generation 4x4 analog audio interface board (O_DAP_ADDA_b) now supported
    • new feature (Web UI) important status messages are now shown on a red info bar
    • new feature (Web UI) preset cleanup function helps deleting unused presets
    • new feature (Mobile UI) configurable button matrix (please see Mobile UI side menu)
    • improved (Mobile UI) for simplification only profiles are shown by default (can be reconfigured via Web UI)
    • improved (Interface) option boards without distinct firmware are now nevertheless shown on the Firmware Update page to provide better system overview
    • improved (Audio) manual stereo routing is now carried out simultaneously for both channels
    • improved (Audio) added ITU 1770-4 mode. This mode equals ITU 1770-3
    • improved (System) status and front panel display turns red on DSP halt
    • improved (Firmware) firmware files are internally checked for compatibility before update
    • improved (Factory Defaults) default settings for the loudness recommendations are up to date again
    • improved (Backup) added serial number to exported backup file name
    • improved (Web UI) added comment to latency compensation setup
    • improved (Interface) (O_DAP_8DA_a) analog interface stability at higher sample rates
    • changed (Mobile UI) color of manual voice over switch
    • fixed (Audio) inactive Spectral Signature when switching signal chain order to Filter - Dynamics - De-Esser
    • fixed (Web UI) all blocks in dynamics section are now greyed out correctly
    • fixed (Web UI) problem with reloading login page after a couple of seconds, when authentication is active
    • fixed (Web UI) problem with occasional appearing script problem in some browsers
    • fixed (Web UI) rarely occurring Web UI inaccessibility due to system overload
    • fixed (Web UI) problem when importing single presets in Chrome and Firefox Browsers
    • fixed (Web UI) Local SDI and MADI Routing now works properly
    • fixed (Web UI) problem when modifying routings in preset section
    • fixed (Web UI) black favicon in Internet Explorer
    • fixed (Mobile UI) deleting Hotkeys no longer stops Mobile UI from loading
    • fixed (System) problem with manual voice over breaking when simultaneously activated via Web UI and Events
    • fixed (System) occasionally empty system log
    • fixed (Presets) problem when deleting presets while being loaded
    • fixed (Presets) empty preset groups are no longer automatically restored to factory settings on reboot
  • X*AP RM1 rel_xap_1_10_1-38898.zip descargar (ZIP, 7 MB)
    Changelog 1.10.1 (2017-03-06):

    Firmware-Package for X*AP RM1

    Changes1.10.1:

    • fixed (Menu) Restore Factory Defaults works as expected

    Changes 1.10.0:

    • new feature (Network) automatically reconnects after network drop out or power down
    • new feature (Network) automatic IP-conflict detection and warning
    • improved (Network) stability and robustness against network problems
    • improved (Network) connectivity when using new device with previously utilized ip address
  • T*AP (LEGACY) rel_tap_3_6_1.zip descargar (ZIP, 10 MB)
    Changelog 3.6.1 (2017-03-14):

    Firmware-Package for T*AP Television Audio Processor (Legacy Hardware)

    • changed (Web UI) java meter applet replaced by web sockets to revive metering in browsers without java support

    Please note: the java browser plugin is no longer necessary with T*AP

    • improved (Web UI) unsupported browser message is up to date again
    • improved (Web UI) Chrome, Firefox, Edge and Internet Explorer supported
    • improved (XAP) updated all Audio Processor parameters on XAP RM1
    • X*AP firmware update necessary (1.10.1)!
  • D*AP LM4 (LEGACY) rel_lm4_2_1_1.zip descargar (ZIP, 5 MB)
    Changelog 2.1.1 (2017-03-14):

    Firmware-Package for D*AP LM4 [LEGACY PRODUCT (EOL) ! ]

    • changed (Web UI) java meter applet replaced by web sockets to revive metering in browsers without java support

    Please note: the java browser plugin is no longer necessary with LM4

    • improved (Web UI) unsupported browser message is up to date again
    • improved (Web UI) Chrome, Firefox, Edge and Internet Explorer supported

Aplicaciones

  • J*AM Application Manager
    System: MS Windows™
    descargar
    Changelog 2.10.9.39391 (2017-03-24):
    • Added new Loudness Meter
    • Added numeric adjustable loudness integration range for Analyzer
    • Fixed Log Port renaming update
    • Fixed performance issue
    • Improved stability

Manuales

Folletos

Engineering Bulletins

Artículos